CXO3MHG crystal clock oscillator specification issue 1; may 2016 outline (mm) -sm1 = sm1 (gold plated, rohs compliant) description not recommended for new designs, please see model cxomk 3.3v intended for applications requiring shock survivability to 10,000g (and higher), the surface-mount CXO3MHG oscillator is a high-shock version of the cxo3m oscillator. these oscillators consist of a miniature quartz crystal and a hybrid circuit in a low-profile ceramic package with an extremely small footprint. -sm1 sm1 (gold plated, rohs compliant) -sm5 sm5 (solder dipped, rohs compliant) please note that all data is only valid at 25c unless otherwise stated. frequency parameters frequency 200.0khz to 220.0mhz 100.00ppm to 10,000.00ppm frequency tolerance @ 25c tolerance condition frequency stability 50.00ppm to 100.00ppm 10ppm max in 1st year ageing electrical parameters 3.3v 10% supply voltage supply voltage (absolute maximum rating): -0.5v to 7.0v operating temperature ranges -10 to 70c -40 to 85c -55 to 125c output details output compatability cmos drive capability 15pf output control start up tme: 5ms max enable/disable (en): logic 1 to pad 1, output enabled logic 0 to pad 1, output disabled, output goes to high impedance state, current consumption very low. internal oscillator stops. output recovery is delayed. no connection (nc): pad 1 no connection tri state (ts): logic 1 to pad 1, output enabled logic 0 to pad 1, output disabled, output goes to high impedance state, current consumption low. internal oscillator continues to function. output recovery is immediate. environmental parameters shock: 10000g, 0.3ms, 1/2 sine vibration: mil-std-202g, method 204d, condition d: 20g, 10hz-2000hz swept sine storage temperature range: -55 to 125c printed on 18 may 16 12:03 using model data sheet v1.2550 page 1 of 2 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web: www.iqdfrequencyproducts.com
CXO3MHG crystal clock oscillator specification manufacturing details features: high shock resistance designed for surface mount applications using infrared, vapour phase or epoxy mount techniques cmos and ttl compatible low power consumption optional output enable/disable with tri-state low emi emission full military testing available applications: military & aerospace - smart munitions projectile electronics industrial - engine control down-hole drilling maximum process temperature: 260c, 20 seconds ordering information frequency* model* termination variant* output frequency tolerance (@ 25c)* frequency stability* operating temperature range* pad 1 function* (*minimum required) termination variants: sm1 = gold plated / sm5 = solder dipped (note: non-rohs compliant terminations also available - sm3 = solder dipped) example 10.0mhz CXO3MHG sm1 cmos 100ppm 100ppm -40 to 85 ts compliance compliant rohs status (2011/65/eu) compliant reach status msl rating (jdec-std-033): not applicable packaging details tray pack style: tray pack size: 1 tape & reel in accordance with eia-481-d pack style: reel pack size: 1,000 electrical specification - maximum limiting values 3.3v 10% frequency min frequency max temperature range stability (min) current draw rise and fall time duty cycle c ppm ma ns % 6 -10 to 70 200.0khz 220.0mhz 50.0 - 40/60% 6 -40 to 85 100.0 - 40/60% 6 -55 to 125 100.0 - 40/60% this document was correct at the time of printing; please contact your local sales office for the latest version. click to view latest version on our website. printed on 18 may 16 12:03 using model data sheet v1.2550 page 2 of 2 sales office contact details: usa: +1.760.318.2824 france: 0800 901 383 uk: +44 (0)1460 270200 germany: 0800 1808 443 email: info@iqdfrequencyproducts.com web: www.iqdfrequencyproducts.com
|
